Page 1 of 2
Revolution
Posted: August 14th, 2013, 7:01 am
by Trapp
Whats wrong with my Revolution 2 ? When u shoot it the plastic sabots explode. The customer service gunsmith said the breech plug is bad. Where do i get a new breech plug ? Cant find one. Any help ? Thanks
Re: Revolution
Posted: August 14th, 2013, 1:35 pm
by a1smokepole
Ive tryed to get one myself no do what I did was drill the plug and put in a ventliner in and when you need to replace just put in a new ventliner.
Re: Revolution
Posted: August 14th, 2013, 4:04 pm
by Trapp
Where do I get a ventliner
Re: Revolution
Posted: August 14th, 2013, 7:14 pm
by a1smokepole
Re: Revolution
Posted: August 15th, 2013, 6:37 pm
by GMB54-120
Re: Revolution
Posted: August 15th, 2013, 8:09 pm
by a1smokepole
thinks gmb54-120
Re: Revolution
Posted: August 16th, 2013, 12:19 pm
by GMB54-120
NP, i have one more place i can check but i will have to go there in person.
IIRC the bare primer number is 900047 and the FPJ model is 900043. Its listed in the 2010 catalog and the owners manual pdf file on Knights website.
BTW Extreme/Elite FPJ plugs are supposed to fit the Revolution and Vision also. Only the bare primer plug is different.
This one should work if you want to use the FPJs.
http://www.knightrifles.com/Breech-Plug-vented/
Re: Revolution
Posted: August 17th, 2013, 6:49 am
by Trapp
Hey thanks I ordered one . Will try it next week, hope that solves the problem.
Re: Revolution
Posted: September 13th, 2013, 10:32 pm
by rsgold09
It truly is an alternative way to receive facilitate ones placing or maybe certainly take out with your own little brown eyes with persons some sort of .
Re: Revolution
Posted: January 20th, 2014, 3:29 pm
by sorrycharlie
I have a rev also. The long range hunter & disc extreme is the same plug you can order that from knight or call Bass pro in Springfield, Mo they have a ton of them for $5.00, they are not vented . they are called Thunderdome they were made by the old knight