209 Bare Breech Plug Conversion Instructions

Knight Articles and Muzzleloader Manuals Can Be Found Here.
knightrifles
Site Admin
Posts:75
Joined:January 17th, 2012, 11:53 am
209 Bare Breech Plug Conversion Instructions

Post by knightrifles » October 1st, 2018, 2:21 pm

The Knight KP1 muzzleloader can be converted to use Bare 209 primer without the Full Plastic Jacket using the 209 Bare Breech Plug available from Knight Rifles.

1. Remove the old breech plug from the rifle.
2. Generously grease the new breech plug with breech plug grease.
3. Insert the new breech plug, utilizing the existing Full Plastic Jacket’s breech plug extractor. With the Bare 209 breech plug installed in the rifle, the extractor will not fit into its usual storage position in the rifle and will have to be stored separately from the rifle.

Knight Rifles, American Made muzzleloaders.