Stuck Primers
Win209s are the longest primer. The Fed209A is my 2nd favorite but it creates more fouling in the breach. Rem STSs and CCI were the worst, mag or regular. You can use a SS shim in the primer pocket though and make any primer work. Its a little bit of a hassle though to get the fit just right.
Green Mountain 54-120 Brush Gun
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Re: Stuck Primers
My mountaineer has a less extreme version of this problem. I only use federal 209a. Haven't had a chance to try winnys yet. Takes a few hand heel raps on the stock or a pocket knife to get them out.
Re: Stuck Primers
Recock the bolt and DRY fire the spent primer. It will usually just fall right out afterwards.
Green Mountain 54-120 Brush Gun
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Re: Stuck Primers
I just sent my bolt & plug back today to swap for the new design. Then I'm back to the range with W209's to see what she will do.
Re: Stuck Primers
GregK wrote:I just sent my bolt & plug back today to swap for the new design. Then I'm back to the range with W209's to see what she will do.
Gordy sent me a new bolt & breech plug. I installed it Wed night & went to the range the next day. Fired 3 shots. 110gr BH209, PT Gold 240's, brand new box of W209 primers. After the 3rd shot the primer was stuck in the breech plug & I couldn't get the bolt back. Sent a message to the big wig on the Facebook site & called & left a message with Mona for Gordy. So far.....no response. What I have right now is Knight's flagship boat anchor
Re: Stuck Primers
Just heard from Gordy. He is polishing & champfering a new breech plug & overnighting it to me
-
- Posts:202
- Joined:February 23rd, 2012, 6:29 pm
- Location:Mandeville La.
Re: Stuck Primers
I had the some thing with the leigh plug and just toke fine sand paper and sanded the sides of the primer pocket not the bottom and works great know.
Re: Stuck Primers
They are letting me keep the other plug so I'll try polishing it a bit.a1smokepole wrote:I had the some thing with the leigh plug and just toke fine sand paper and sanded the sides of the primer pocket not the bottom and works great know.
Re: Stuck Primers
I polished all the primer pockets on my conversion. Not because they did bot function but because they cleaned up easier. Carbon does not stick as well to a polished surface.
Green Mountain 54-120 Brush Gun
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Elite 45 blued
Original DISC 45 SS
LRH 52cal