Knight Muzzleloader Forum

Will the williams peep made for the bighorn/t-bolt/disc rifles fit the mountaineer?

Also what is the expected shipping/handling time on a Knight rifle?

Thanks and i'll post some pictures when it arrives and I get to the range.

'darter

Did you ever get a Williams Peep installed? Which one? Did it fit?

snaildarter wrote:Will the williams peep made for the bighorn/t-bolt/disc rifles fit the mountaineer?

Also what is the expected shipping/handling time on a Knight rifle?

Thanks and i'll post some pictures when it arrives and I get to the range.

'darter

The stock on the Mountaineer may be tick to install a Williams FP without working the wood.

sabotloader - thanks for all your help. I ordered the Mountaineer today and went with the same sight setup you have. Although I ordered stainless/silver Weaver mounts. Hoping the setup you used for the Ultra-Lite carries over OK to the Mountaineer. I like the simplicity of the NECG. I do not need 1/4" click adjustments for any reason. Once I'm dialed, I'm dialed.

Brian

bsgman wrote:sabotloader - thanks for all your help. I ordered the Mountaineer today and went with the same sight setup you have. Although I ordered stainless/silver Weaver mounts. Hoping the setup you used for the Ultra-Lite carries over OK to the Mountaineer. I like the simplicity of the NECG. I do not need 1/4" click adjustments for any reason. Once I'm dialed, I'm dialed.

Brian

It will work just fine on a Mountaineer.. The only question is if you run out of adjustment with the NECG you might have to go to a taller or shorter front sight depending on the adjustment range. The 312 works well for me shooting 250 to 325 grain bullets.

Here are some pics of my Mountaineer

I likewise was intending to get the most beneficial charges.