45 Disc 1:20 bedded and ready for testing
The Super Disc 1:20 twist 45 cal is finally ready to test. It was very accurate but I figured a bedding job might even tweek it a little more, especially for long range, hence the bedding job with acura -glass.
-
- Posts:202
- Joined:February 23rd, 2012, 6:29 pm
- Location:Mandeville La.
Re: 45 Disc 1:20 bedded and ready for testing
that will help good job blackpowder4me
Re: 45 Disc 1:20 bedded and ready for testing
I've been thinking about doing that also but I have never bedded one before. But now that I have an extra stock that sabotloader sent me I might give it a try.
Re: 45 Disc 1:20 bedded and ready for testing
I was thinking this should be under the SUPER DISC POST, not the Disc Extreme.
-
- Posts:202
- Joined:February 23rd, 2012, 6:29 pm
- Location:Mandeville La.
Re: 45 Disc 1:20 bedded and ready for testing
If you take your time and witch what your doing its not bad Ive done 7 knights and it helped all of them
Re: 45 Disc 1:20 bedded and ready for testing
Thanks buddy, I'll give it a try. For the recoil lug what special care needs to be taken.
Re: 45 Disc 1:20 bedded and ready for testing
3 or 4 layers of tape on the lug would be beneficial.sqezer wrote:Thanks buddy, I'll give it a try. For the recoil lug what special care needs to be taken.
Re: 45 Disc 1:20 bedded and ready for testing
Any updates to the progress made with this project.
I have one similiar and am interested in the benefits of bedding the barrel / action.
Thanks
I have one similiar and am interested in the benefits of bedding the barrel / action.
Thanks