Page 1 of 1
Does stock for DISC Extreme fit Original DISC?
Posted: June 8th, 2014, 6:12 pm
by Paladin
Hey all- just got a very nice Original DISC, but I'd like to put a stock on it with a straight comb, like the stock in the link below. I was under the impression the differences between the Original DISC and Extreme and Elite was bolt and breech plug related? So, with that said, are the stocks still interchangeable? Thanks!
http://www.knightrifles.com/disc-extrem ... -straight/
Re: Does stock for DISC Extreme fit Original DISC?
Posted: July 25th, 2014, 11:02 pm
by Gunny85
Yes it will fit just fine with no problems. The only difference is the is the Elite the barrel is contoured a little steeper than the others but no issues there either.
Re: Does stock for DISC Extreme fit Original DISC?
Posted: July 28th, 2014, 10:23 am
by GMB54-120
Gunny85 wrote:Yes it will fit just fine with no problems. The only difference is the is the Elite the barrel is contoured a little steeper than the others but no issues there either.
The Elite recoil lug is also different but they do fit in some NEW Extreme stocks without modification. They will not fit in an old Extreme stock without some inletting in the lug area.
DISC Originals have the same lug as a Extreme and stocks do interchange. I have one right now in a Extreme TH composite. It dropped right in.
Re: Does stock for DISC Extreme fit Original DISC?
Posted: July 28th, 2014, 5:17 pm
by Gunny85
Sorry about the confusion on the Disc Elite. I have one in the safe and wasn't thinking bout the lug. He is right. The straight stock would have to be milled to fit the double lug but the thumb hole has already been milled for that lug. There has been a mold change to the stock now so it will be able to be used with either lug.