Looks like the general forum got spammed again so
Dropping down here to try and get a answer. What is the best rate of twist for a sabot only shooter. I have several options on a custom barrel I plan to have made.
Re: Looks like the general forum got spammed again so
It depends on the length of the bullet and MV more than anything else. In a 50cal, a 1-28 is fine for the vast majority of bullets and typical MV. A 1-24 has the advantage when the bullets get longer and heavier than 300gr.
Green Mountain 54-120 Brush Gun
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Elite 45 blued
Original DISC 45 SS
LRH 52cal
Re: Looks like the general forum got spammed again so
One in 28 it will be. Shooting the Barnes expander solid copper bullet in 451 dia and 250 grains by use of a black crush rib sabot and 90 grains of triple 7.GMB54-120 wrote:It depends on the length of the bullet and MV more than anything else. In a 50cal, a 1-28 is fine for the vast majority of bullets and typical MV. A 1-24 has the advantage when the bullets get longer and heavier than 300gr.