will the williams peep work on a mountaineer?

Post Reply
snaildarter
will the williams peep work on a mountaineer?

Post by snaildarter » June 18th, 2013, 9:34 am

Will the williams peep made for the bighorn/t-bolt/disc rifles fit the mountaineer?

Also what is the expected shipping/handling time on a Knight rifle?

Thanks and i'll post some pictures when it arrives and I get to the range.

'darter

bsgman

Re: will the williams peep work on a mountaineer?

Post by bsgman » August 12th, 2014, 6:26 pm

Did you ever get a Williams Peep installed? Which one? Did it fit?

User avatar
sabotloader
Posts:197
Joined:February 22nd, 2012, 11:07 pm

Re: will the williams peep work on a mountaineer?

Post by sabotloader » August 13th, 2014, 4:12 pm

snaildarter wrote:Will the williams peep made for the bighorn/t-bolt/disc rifles fit the mountaineer?

Also what is the expected shipping/handling time on a Knight rifle?

Thanks and i'll post some pictures when it arrives and I get to the range.

'darter
The stock on the Mountaineer may be tick to install a Williams FP without working the wood.
Keep on Shooting Muzzleloaders - They are a blast

bsgman

Re: will the williams peep work on a mountaineer?

Post by bsgman » August 13th, 2014, 5:34 pm

sabotloader - thanks for all your help. I ordered the Mountaineer today and went with the same sight setup you have. Although I ordered stainless/silver Weaver mounts. Hoping the setup you used for the Ultra-Lite carries over OK to the Mountaineer. I like the simplicity of the NECG. I do not need 1/4" click adjustments for any reason. Once I'm dialed, I'm dialed.

Brian

User avatar
sabotloader
Posts:197
Joined:February 22nd, 2012, 11:07 pm

Re: will the williams peep work on a mountaineer?

Post by sabotloader » August 13th, 2014, 9:30 pm

bsgman wrote:sabotloader - thanks for all your help. I ordered the Mountaineer today and went with the same sight setup you have. Although I ordered stainless/silver Weaver mounts. Hoping the setup you used for the Ultra-Lite carries over OK to the Mountaineer. I like the simplicity of the NECG. I do not need 1/4" click adjustments for any reason. Once I'm dialed, I'm dialed.

Brian
It will work just fine on a Mountaineer.. The only question is if you run out of adjustment with the NECG you might have to go to a taller or shorter front sight depending on the adjustment range. The 312 works well for me shooting 250 to 325 grain bullets.

Here are some pics of my Mountaineer

Image
Keep on Shooting Muzzleloaders - They are a blast

fifacoins07

Re: will the williams peep work on a mountaineer?

Post by fifacoins07 » September 1st, 2014, 12:16 am

I likewise was intending to get the most beneficial charges.

Return to “Mountaineer”