Original Knight Disc Bolt issue
I have an original Knight DISC 50 cal, SS. It came with a C tool to disassemble the bolt. However, the C tool was pulled out before the process was completed. Does anyone know how to get the C tool back in or how to disassemble the bolt without the C tool in place?
Re: Original Knight Disc Bolt issue
Look at your bolt & you can see how the 'main-spring' needs to compress as you turn the bolt back into proper position. It's been a while but I had mine slip out also before the proper time. I may of took some vice grips & put the other end in a vice, all well protected to prevent dinging up the metal, used cloth, leather whatever. You basically have to twist it back into position. It takes a firm grip & it should work.