New Member and New Knight

[bsekf]

I acquired a 50 cal. Knight In-Line Muzzle Loader, has a black plastic stock with no KNIGHT inlay, uses percussion caps, bolt screws out and the safety device screws in and out on the bolt, it has a manual safety on the side. The breech plug screws out, the nipple is not hex, has 2 flat sides and the breech plug has slots. I did not get a wrench, spanner or any tools with the gun. I have looked on the Knight site and still am unsure of the model I have, there is no model number on the gun, that I can find.

What model do I have? Where do I get a tool to remove the breech plug? Is the breech plug and nipple one piece? What parts do I need to change to a 209 primer ignition? Does the bolt have to be altered if I change to a 209 primer ignition?

Thanks,

Bill

[GMB54-120]

A picture would be helpful