LK 93 issues......need help

Post Reply
jrock2434
LK 93 issues......need help

Post by jrock2434 » October 23rd, 2014, 2:29 pm

I have a NWTF Edition LK 93 that has probably been shot less than 10 times in alot of years now. The gun is clean but when I pull the hammer back it will not cock in place. You just pull back against the spring and it will slide shut when you let the pressure off of it. Does anyone have any ideas what would cause this? Could it be in the trigger mechanism or is there something in the barrel that causes the bolt to lock in firing position? Thanks in advance for any help you have.

Droptine26s

Re: LK 93 issues......need help

Post by Droptine26s » October 26th, 2014, 1:50 pm

I would check the sear on the trigger assembly. It could be stuck in the housing and not returning to its full upward position.

DiscMan

Re: LK 93 issues......need help

Post by DiscMan » October 28th, 2014, 8:47 pm

A couple of things might have happened. First I check to see if the screw that holds the trigger has backed out, if it has then tighten it up. If not then take the trigger off and clean it. If that does not work then contact customer service and request a replacement trigger. Hope this helps